• Wheel Material: Phenolic with Plain teflon sleeve
• Wheel Diameter: 100mm
• Tread Width: 35mm
• Mount Height: 135mm
• Weight Rating: 125KG @ 100°C, 100KG @ 250°C
• Turning radius swivel plate and bolt hole: 91mm

Our 100mm (4 inch) High Temp Phenolic wheels are Italian made - also known as Monolithic. Supplied with a PTFE teflon coated sleeve bush they are an excellent option for food ovens baking bread and light duty industrial ovens curing paint hotter than 230°C.

Phenolic wheels are the preferred wheel for extended periods of up to 250°C.

The castor forks are zinc plate Core Coat finished with clear lacquer that provides best quality corrosion protection.

Available in swivel and fixed plate mounting styles or 12.7mm bolt hole.

The plate castors can be fastened by screwing the 96x78mm mounting plate using the four 8mm holes with slotted hole centres, but most commonly used at 60x80mm. The bolt hole castors can be mounted using a single M12 bolt through the centre of the mounting hole.

The turning radius of the swivel castors is 91mm. The total height from the floor to the top of these castor units is 135mm.

The phenolic wheels are 100mm diameter x 35mm tread width and have a 8mm bore x 40mm hub width and run on a PTFE Teflon sleeve bush through the centre of the wheel. Please note that phenolic wheels are not suitable for applications where wheels are subjected to impact such as when a trolley is rolled down steps.